Lindsey Frick's Comments

Comment Wall (22 comments)

You need to be a member of The Engineering Exchange to add comments!

Join The Engineering Exchange

At 2:24pm on March 2, 2011, Simon Farnell said…
Thanks for linking with me. I hope we can be useful to each other! Let me know what you get up to!
At 11:14pm on November 23, 2010, SACHIN VARA said…
Hello,

I am sachin from india.

I want to some information from you, can you suggest ?

I am also mechanical Engineer.

Thanks
At 10:37am on March 24, 2010, Karthikeyan said…
is there openinings in your concern for me...?
At 10:36am on March 24, 2010, Karthikeyan said…
Dear Lindsey,
thank you for your reply. i would like to know more about your projects. i know CATIA & SOLID WORKS also.

i am having very good CAD Package Knowledge, looking an abroad oppurtunity.

thank you
G.Karthikeyan
At 1:08am on March 24, 2010, Karthikeyan said…
Dear Lindsey
This is G.Karthikeyan working as a Design Engieer for PTC. i am expert in Modeling, assembly, Detaiing, Mechanism. and weblink modules.

if you have projects in pro-e kindly send me. my mail is krthk86.g@gmail.com

Thank you
G.Karthikeyan.
At 6:03am on December 12, 2009, Angel M. Exposito said…
hi I'm Angel from Puerto Rico , nice to meet you.
At 9:44pm on August 31, 2009, laxman said…
Hi, Lindsey,
Greeting of the day,
I am representing CAD Engineering services company from INDIA.

Do you outsource the CAD or CAD Customisation projects?
Do you need skilled CAD engineers for your company?

Please feel free to contact us & I would be happy to answer your queries. With this I look forward to explore further for the potential business opportunities.

Regards,
Lakshminarayana
At 2:17am on August 13, 2009, Ashish S said…
Web Site starts working, If you need anything with CAD CAE let us inform
At 3:12pm on April 15, 2009, Callisto said…
Greetings Lindsey.
At 8:44am on January 16, 2009, Bryant said…
It really depends on the size and construction. We can fabricate our tube with up to 3 inner layers of aluminum 100 micron thick and we have also made samples with steel inner layers. Are you talking about internal pressure or a compression force? Our tube does go through an environmental cycle for validation where it see high temp and humidity and must not lose more than 15% of it's original strength. What type of application do you have in mind?
At 8:21am on January 16, 2009, Bryant said…
Hope you are staying warm up there Lindsey!
At 6:44am on December 29, 2008, Voy Anuszkiewicz said…
Hi. I could not open your company link.
At 8:14am on December 17, 2008, vini said…
Hello
You are as Design Engineer. Which softwares you aware it.
At 8:09am on December 17, 2008, vini said…
Hello.............
At 5:08am on December 11, 2008, saksham said…
I hope it will not be a bad idea, if I send my some of modells to you , to have you feed back
At 5:08am on December 11, 2008, saksham said…
Visit my home page www.engineer-india.com
At 5:07am on December 11, 2008, saksham said…
I hope your company is in growing stage..
At 5:07am on December 11, 2008, saksham said…
When I tried to open your home page it felt like some thing....................
At 5:06am on December 11, 2008, saksham said…
The page you tried to access does not exist on this server. This page may not exist due to the following reasons:

You are the owner of this web site and you have not uploaded (or incorrectly uploaded) your web site. For information on uploading your web site using FTP client software or web design software, click here for FTP Upload Information.
The URL that you have entered in your browser is incorrect. Please re-enter the URL and try again.
The Link that you clicked on incorrectly points to this page. Please contact the owner of this web site to inform them of this situation.
At 9:04pm on December 10, 2008, Ashish S said…
ok Hope some good work to see ..

Members

© 2019   Created by Marshall Matheson.   Powered by

Badges  |  Report an Issue  |  Terms of Service