What is the relatioship between power factor and air gap of an induction motor?

Airgap of the induction motor is inversely proportional to the power factor and efficiency. The Airgap between stator and rotor decides amount of energy transferred from stator to rotor. Airgap incteases the loss of fluxes transferred from stator to rotor. Thus efficiency decreases if Airgap increases ,

now comming to the part of power factor :-

Power factor is defined as ratio between active or real power and the apparant power consumed by the load. If the load increases the power factor increases at full load power factor is 0.8–0.9 lagging for 3-phase IM.

Increasing Airgap means less amount of fluxes linked with the armature winding which makes the EMF induced in the rotor low. But the apparant power driven by the constant load will be same thus the load will draw more current to make the apparant power same . More losses makes the output active power less .

Airgap between stator and rotor increases means magnetizing current drawn by stator itself increases . This magnetising current lags almost 90 ° from the supply voltage . So to induce EMF more magnetising flux is needed as airgap is high.

this no load fluxes increases the angle between supply voltage and load current it makes the power factor of the machine poor.

Read More:https://sdvelectrical.blogspot.com/2019/01/effects-of-air-gap-on-pe...

Views: 49


You need to be a member of The Engineering Exchange to add comments!

Join The Engineering Exchange


© 2021   Created by Marshall Matheson.   Powered by

Badges  |  Report an Issue  |  Terms of Service