When people first started working with Revit, many thought it might be hard to make 2D drawings during this software because Revit is primarily a 3D tool.

The software helps visualize architectural elements in Render Farm and component libraries. If you learn the tool intimately , though, you would possibly be surprised to find out that Revit can do quite bit when it involves 2D drawings and details.

The most obvious feature of this BIM software is its ability to line up sheets. very similar to paper space in AutoCAD, sheets in Revit relate to laying out your design on paper. you've got the choice to feature multiple views on one sheet and scale each of them.

There also are parametric fields that you simply can use for the title block. you'll even add multiple copies of an equivalent floorplan or an equivalent view by creating duplicate views and dragging them to the sheet.

If you flick through the multiple families that accompany Revit and therefore the many available for download, you'll notice that a lot of of those are just in 2D. tons of architects might think that because Revit is primarily a 3D Rendering Services tool, there wouldn't be 2D families available, but this is often not the case.

A good set of construction drawings in Revit will include many 2D elements and families. Many system families, tags, numbering and text also can be added to a construction drawing set. there's how to feature schedules and area charts if required, all of which may be parametric. you'll also add structural grids, which are easily available within the structure tab.

The skepticism about 2D drafting in Revit are often overcome by watching a number of the sectional details which will be created during this powerful software. Detailing would be of concern to people that think creating detailed 2D drawings isn't possible during this software.

There are tools in Revit which will boost your sections with color and hatch and appearance even as good because the ones in AutoCAD. you'll use the detail line command to draft 2D lines a bit like you'd neutralize AutoCAD.

Then there are tools like Join and Cut Profile, which could assist you immensely while cleaning up the detail. it's important to notice that the majority of this detailing should be done by creating a callout, and not during a Revit section. The callout view is that the correct place where all the detailing commands are often used. The Cut Profile command is probably the foremost helpful when it involves properly adjusting the section lines.

Views: 13

Comment

You need to be a member of The Engineering Exchange to add comments!

Join The Engineering Exchange

Members

© 2020   Created by Marshall Matheson.   Powered by

Badges  |  Report an Issue  |  Terms of Service