A Three-Part 'Coffee Chat' With a Guided Motion Expert

We recently spent time with one of our applications engineers, Dan Fletcher, to go over some basic info about choosing and sizing our DualVee linear bearings. That conversation turned into a three-part series we shared on our blog. We invite you to check it out!

Part I: Spec'ing a Guide Wheel

PRECISION AND SPEED are two factors are critical when choosing what linear guide system works best for your needs. Many other factors have to be taken into account, too, like environment type, duty cycle, length, temperature and payload weight. Fletcher explains ... click through to read on!

 

Part II: Tolerances and Lubrication of a DualVee system

TOLERANCES AND LUBRICATION Picking up from the previous discussion about DualVee systems' form, function and range of environments, Fletcher continued by broaching the subject of tolerances and lubrication of the double row angular contact bearing. Read the second installment here.

Part III: Sizing a Guide Wheel

ROLLING RIGHT ALONG We finish up our series talking about how to size DualVee wheels and systems built around this type of bearing. Learn what factors Fletcher and our other engineers have to consider when they need to spec out a product or system for one of our customers. Read the third installment right here.

Views: 102

Comment

You need to be a member of The Engineering Exchange to add comments!

Join The Engineering Exchange

Members

© 2019   Created by Marshall Matheson.   Powered by

Badges  |  Report an Issue  |  Terms of Service