Electricity is a luxury and a necessity. It is hard to imagine life without it as the daily activities like charging electronics, storing food, and working require electricity. Electricity is an integral part of our life and it is used so commonly that we forget that it can be dangerous. Every property has electricity and that is why the electrical accidents are pretty common. Electrical safety should be a priority…Continue
Added by Emma Miah on April 24, 2019 at 3:46am — No Comments
For a long time, employers have been paying their workers using traditional paychecks. This method is both time consuming and a little bit expensive. But currently, there is a sure way called the paperless wage payment; for budget-conscious bosses which is both time-saving and significantly reduces costs. You can get more info to know how this mode of payment works.
Added by Marina Pal on April 24, 2019 at 12:44am — No Comments
The CTs must be grounded at the single point. The grounding of the CTs at the multiple points lead to the voltage of different magnitude at two points. The realy used for the differential protection may operate when the fault is outside of the protection zone.
Added by Satyadev Vyas on April 22, 2019 at 6:24am — No Comments
Every industry benefits from revolutionary trends in technology. For the architectural industry, CAD Design and Drafting came as a godsend to make designing and presentation of construction sketches easier. Through this innovative technology, architectural could save time in the initial design process and present more professional drawings to clients.…Continue
Added by VegaCADD on April 21, 2019 at 11:30pm — No Comments
Dust is one of the most common problems in manufacturing facilities. Without the right approach to dust suppression, the health and productivity of workers can be compromised. They will suffer from various health conditions that will impair their ability to carry out their tasks successfully. The rest of this post…Continue
Added by Marina Pal on April 21, 2019 at 9:07am — No Comments
Added by Satyadev Vyas on April 19, 2019 at 4:30am — No Comments
The knee point voltage(KPV) of the current transformer tells the information about the magnetization characteristics of the current transformer. According to IEC,the knee point voltage is defined as a point where 10% increase in the secondary voltage cause an increase in the secondary current by 50%. The current transformer gets saturated at this point.…Continue
Added by Satyadev Vyas on April 19, 2019 at 4:30am — No Comments
Are you looking for glazing services in Cape Town?
Homeowners as well as commercial establishments look forward to glazing their windows – the reasons might be different, but the benefits of glazing are the same for all. In fact, there are a number of providers in Cape Town, which offer double and single glazing services for homeowners. Randburg Glass is a reputed name, well known for providing glazing and glass replacement…Continue
Added by Alfie Davies on April 19, 2019 at 1:48am — No Comments
Building projects can be quite a headache and hassle if the right people are not hired for the project. There are several things that people should look for when they desire to hire Dallas commercial contractors. It can be a process to hire the right people; however, that is better than losing money by having to redo projects that were just completed.
Before the search even begins, it is a good idea to write down everything that…Continue
Added by Marina Pal on April 18, 2019 at 1:06am — No Comments
Hose couplings and other hose fittings are now available in a wider selection than ever before, with those looking to buy hose fittings and parts now presented with a multitude of options, making it difficult for them to determine which is the most suitable. With this in mind, today we are here to discuss some of the most common types of garden hose fittings, with the ultimate intention of allowing all looking to…Continue
Added by Marina Pal on April 11, 2019 at 1:20pm — No Comments
Added by Mike Lubovich on April 11, 2019 at 2:57am — No Comments
Without any doubt, structural steel detailing is a process that demands nothing less than 99% of accuracy. Out of all the things, even the smallest of errors can lead to a massive loss of not just money but time as well.
Added by Matzen Solutions on April 10, 2019 at 6:01am — No Comments
Architects and Interior Designers all agree; good designs will always start with the floor layout! A House Floor Plan indicates the layout of the property, as viewed from above. Drawn to scale, a plan shows the location of walls, doors,…Continue
Added by Architectural Rendering Studio on April 10, 2019 at 3:34am — No Comments
The pallet wrapper is a machine that enables firm sealing or wrapping of goods tightly so they can be secure during shipment and also ensure unitization. The goods are placed on the pallet wrapping machine as required not exceeding the required size or overhang. A tight cable is driven down over the top load of the pallet to ensure that the load is tight enough to the pallet. Although, this is done very carefully in case the goods can break. However, the pallet wrapping would not completely…Continue
Added by Marina Pal on April 8, 2019 at 12:52pm — No Comments
It is always advisable to take safety measures as a number one priority when dealing with any kind of fuel, energy, or heating system. And in this case, propane is no exception. Propane is commonly used in homes for heating, cooking, and drying.
Even though propane gas is highly flammable, it is safe to use because all the safety devices such as a propane regulator are attached to the tank. If you are using…Continue
Added by Marina Pal on April 5, 2019 at 3:38am — No Comments
The use of scaffolding has been very common in construction sites for a while. A scaffolding structure provides stability and safety to all workers while they work on the higher levels of a building, which enhances the speed and quality of the work too. So, you must have scaffolding when you are constructing, renovating or repairing your house. Now,…Continue
Added by Alfie Davies on April 5, 2019 at 2:30am — No Comments
As realtors know only too well, it’s very hard to sell an empty home! Bare walls and echoing hallways look sad and neglected and do not make a pretty picture. When clients are unable to imagine themselves living in a property, chances are it will not be sold quickly. With the hyper-competitiveness in today’s …Continue
Added by Architectural Rendering Studio on April 3, 2019 at 4:32am — No Comments
Having a septic tank system can seem a little daunting if you've always been connected to your municipality's water and sewer supply. But, there are some great advantages to having one. Not only do you not have a utility bill for water and sewer usage, but you are actually helping the environment by disposing of your home's wastewater naturally. Here's everything you need to know about your septic tank system. …Continue
Added by Marina Pal on April 2, 2019 at 3:01am — No Comments
One of the greatest technologies in the AEC (Architecture, Engineering, and Construction)is CAD drawing. For a long time, architects struggled with the manual paper and ink drawing process which is a time-consuming and labor-intensive process. CAD Drawing Services have changed all this but for most small firms, lack of resources to implement these services in-house poses a problem. However, outsourcing…Continue
Added by VegaCADD on April 1, 2019 at 10:52pm — No Comments
• Casting steel Inspection
To be certain that casting/forging process follow proven procedures
• Heat Treatment
To be sure that heat treatment is done properly for all parts, that no portion of the product is overlooked
• Chemical Analysis & Mechanical Property Tests (and Non Destruction Test).To be certain that：
Added by qczoomen on April 1, 2019 at 10:33pm — No Comments