March 2009 Blog Posts (11)

What good are PE Licenses?

There was a time —many years ago in my state—when you did not need to have a college degree to get a Professional Engineers license. You only needed a recommendation from three PE-licensed engineers to take the fundamentals of engineering test and pass it to prove that you understood the basics. Then, after about four or five years of on-the-job experience, you could take the test that covered your discipline, such as electrical or mechanical engineering. If you passed, you were awarded the PE… Continue

Added by John R. Gyorki on March 29, 2009 at 5:15pm — 37 Comments

Sheet Metal Design by Pro-Engineer Wildfire 2 (Part I-Basic Panel)

Sheet metal Design is a little difference with Solid Model Design.

Basic difference is Sheet metal Design which is based on the uniform or constant thickness material and related process are Press Brake Bending or Stamping etc..

When you start design on Sheet metal Part, you need to think about bending reliefs at the corners and also process flow. If you are working with press brake bending, you need to think about tooling space and set K-factor to .42 or using bending Table from your… Continue

Added by Kratos72 on March 28, 2009 at 6:30am — No Comments

evaluation of a CNC Router for a small business

CNC SHARK PRO review. Manufactured by Next Wave Automation, distributed by Rockler Woodworking, and controlled by Vectric's V-Carve Pro 4.6 software. This review is uncompensated by any vendor.



SUMMARY. Two thumbs up.



BACKGROUND. In Jan-09 I bought the CNC Shark Pro. Here are my experiences with it, CNC Router specifications I traded-off, and evaluation of competing budget-grade CNC Routers I investigated. My background is 30+ years as a Mechanical Engineer; many of my… Continue

Added by Mike Pientka on March 23, 2009 at 12:25pm — 4 Comments

Step Motor Basics Calculator

Looking for feedback on our latest calculator widget on step motor basics, features torque, speed, inertia, distance and resolution. Thanks!

MM

Continue

Added by Marshall Matheson on March 23, 2009 at 9:29am — 1 Comment

20% off until April 1st, 1, progeCAD 2009 New Licenses and Upgrades

Save 15% Portland, OR, USA - March 22, 2009 - The exciting new progeCAD 2009 software has been released and in celebration we are offering deep discounts on upgrades on older versions.…

Continue

Added by progeCAD USA on March 22, 2009 at 9:21pm — No Comments

New sheet metal "corner fill" product allows up to one inch radii

This is a new sheet metal fabrication product designed and marketed by product design consulting firm www.mesolutionshome.com to fill a need for large radii sheet metal corners. For 50 years companies have tried various labor intensive ways to get large radii in their sheet metal products and give up because of the high cost to produce. M.E. Solutions has finally solved the problem with their proprietary "cornerfill" product now availavle in any… Continue

Added by Phillip Marsh on March 20, 2009 at 10:13am — 4 Comments

3 Dudes Gone 3D Advertising Campaign

Check out SolidWorks Latest Advertising Campaign, featuring 3 engineers in a contemporary situation comedy format this multi-media campaign is designed to resonate with the social media , online and YouTube generation in a fresh slant on 3D.

Just watch the videos at http://www.solidworks.com/pages/3dudes/

Added by Lisa Van Giesen on March 19, 2009 at 10:43am — No Comments

progeCAD 2009 Standard Released by iCADsales.com

iCADsales.com (http://www.icadsales.com) announced today the release of their lower cost alternative for editing AutoCAD 2009 and earlier version drawings. progeCAD 2009 Standard progeCAD offers na…

Continue

Added by progeCAD USA on March 18, 2009 at 2:15pm — No Comments

Subsea Oil and Gas equipments.

Hi friends
Wish to know about Subsea Products and Equiments...

Added by Vijay on March 16, 2009 at 12:17am — 2 Comments

Hydra Heat Transfer System

Most of you will already know Heat Pipe Theory.

The higher the vapor pressure of a liquid, the lower the normal boiling

point of the liquid.

Datails on http://www.transterm.ro/overview.htm





Unlike the rate of Heat Conduction at the Metal, Heat can travel at Sonic Speed at the Vapor Condition.

My Design is based on this theory and use the Separator to flow back of… Continue

Added by Kratos72 on March 15, 2009 at 12:54am — No Comments

Double Your Pleasure with DoubleCAD XT FREE Version that is Full Featured, Fully Licensed.

DoubleCAD™ XT

By Richard Williams 3/1/09

You really have to love it when a plan comes together and so it has because it enabled me to write this review. Now that I have found a way to do it with an assist from my wife and with some other things, I can now move forward with my promised reviews of this really wonderful, fully featured and ABSOLUTELY FREE give away by IMSI/Design . What happened lately in the life of this writer is kind of a set back with eyesight. “But, where there is a… Continue

Added by Richard Williams on March 3, 2009 at 9:45pm — No Comments

Monthly Archives

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

1999

Members

© 2018   Created by Marshall Matheson.   Powered by

Badges  |  Report an Issue  |  Terms of Service