All Blog Posts (14,267)

Top 5 Essential Elements of a 3D Product Design Project

3D modeling service is a surefire way to get jaw-dropping CGI for product design projects. The multifunctionality of 3D models allows using them for different purposes, starting from product testing and finishing with promotional campaigns.



Furniture Manufacturers want to update their product pages on the e-commerce website as the current visual design doesn’t attract enough users. Since the launch of their online store, the traffic and sales have been getting lower than…

Continue

Added by VegaCADD on June 25, 2019 at 10:57pm — No Comments

Transformer Over Fluxing Protection

The cooled rolled grain oriented(CRGO) core is used in the transformer. The flux produced in the primary travels through the magnetic core and gets linked to the secondary. The maximum flux density of the CRGO core is 1.9 Tesla and if the core is magnetized above the rated capacity, the core gets saturated. The saturation of the core cause heating in the core and the other parts of the transformer. The flux density in the core should not increase above the…

Continue

Added by Satyadev Vyas on June 24, 2019 at 9:44pm — No Comments

Common Metal Fabrication Processes

Metal fabrication is a broad term that is used to refer to the process of cutting, shaping, or molding a metal material into a final product. Instead of the final product being manufactured from a wide range of independent components, fabrication creates an end product from a single raw material- metal.

If you look around your environment, you will notice many products that have been manufactured using the process of metal fabrication. Things ranging from aircraft parts to paper clips…

Continue

Added by Marina Pal on June 24, 2019 at 6:29am — No Comments

Significance of back EMF in DC Motor

When the DC voltage is applied to the armature of the DC motor,the motor draws enormously high current at the starting time and it decrease as the motor accelerates.Why the DC motor draws high armature current at the starting and how the current get decreased as the motor accelerates is because of the counter potential force developed across the armature winding. The counter voltage induced across the armature winding is called the back EMF. 

The counter EMF…

Continue

Added by Satyadev Vyas on June 24, 2019 at 5:30am — No Comments

Solar Panels with Batteries Allow for Electricity Use Even at Night Sell My House Fast Investor Explains

Solar panels will only generate power from the sun during the daytime. It is at this time, that the requirement of power is less as there is no need for lighting, or you may be away at work. This power can then be used to recharge batteries that can store power which you can use at nighttime when you need the power and the solar panel is not generating power.

The consideration of solar-plus-storage options requires a proper understanding of the product specifications of the battery.…

Continue

Added by Marina Pal on June 20, 2019 at 3:38am — No Comments

Galvanized Steel and Iron Emergency Plumber Favorite New Tool New Tools

The first fully integrated plumbing systems in an urban environment were developed by the Romans in around 52 A.D. The system consisted of a series of aqueducts, public bathing facilities and bronze, as well as lead piping which both supplied fresh water - and transported sewage from homes.

Of course, times have changed - but even today we see innovation - and the evolution of how plumbing systems are constructed - including the materials that are used in piping. However, there is…

Continue

Added by Marina Pal on June 20, 2019 at 3:37am — No Comments

Pressure Sensor Market- Smart Strategies of the Research and Development Process

A pressure sensor is a device that senses pressure and converts it into an analog electric signal whose magnitude depends upon the pressure applied. Since they convert pressure into an electrical signal, they are also termed as pressure transducers. Pressure sensors have been extensively used in fields like manufacturing, automobile, aviation, air conditioning, bio-medical measurements, hydraulic measurements etc.

The increasing demand from automotive and medical industries, increased…

Continue

Added by Jitendra More on June 20, 2019 at 12:39am — No Comments

Commercial Laundry Trends to Watch Out For

Change is the only thing that is constant in this world, even for commercial laundry businesses. If you are part of this industry, you need to evolve to meet the changing demands and stay relevant. In this article, we’ll look at some of the trends you should watch out for, which will impact your business operations in more ways than one.

 

Going Green

 

This is no longer new. Year after year, this trend intensifies,…

Continue

Added by Marina Pal on June 18, 2019 at 3:17am — No Comments

Why Is Stainless Steel Preferred Most in All Industries?

One of the strongest metals, stainless steel is widely used presently. Among more than 150 grades of stainless steel, more than a dozen are used every day in several applications. It is available in various forms, like sheets, plates, valves, flanges etc. There are many stainless steel tubes, pipes and coil suppliers in South Africa.

Industries that commonly use stainless steel…

Continue

Added by Alfie Davies on June 13, 2019 at 7:22am — No Comments

Top Trends in Process Automation Industry 2019 - 2027

Process automation aids in the integration and orchestration of tools, processes, and people through a set of workflow. It uses a network for the interconnection of controllers, sensors, actuators, terminals, and operator. Process automation provides faster response to the concerns of the mission-critical systems, helps in the…

Continue

Added by Jitendra More on June 12, 2019 at 9:17pm — No Comments

Industrial Energy Management Systems by Technology SCADA , PLC, DCS, MDM, EMIS

Industrial Energy Management Systems Market to 2027 - Global Analysis and Forecasts by Technology (Supervisory Control And Data Acquisition (SCADA), Programmable Logic Controls (PLC), Distributed Control System (DCS), Meter Data Management (MDM), Energy Management Information System (EMIS), Others); Hardware (Communication Network Hardware, Industrial Hardware); Services (System Integrators, Consulting, Maintenance and Support Services); End-User (Automotive, Construction, Food and…

Continue

Added by Jitendra More on June 11, 2019 at 10:15pm — No Comments

South African Mining Solutions: 3 Popular Natural Resources

South Africa is rich in natural resources, contributing significantly to reserves around the world. The success of the South African mining industry is largely due to expert mining solutions that have been designed and commissioned in order to keep the mines running at optimal productivity levels. South African mining solutions, which can be developed by independent mining advisors, are geared towards…

Continue

Added by Marina Pal on June 11, 2019 at 1:19am — No Comments

True Power Factor

True Power Factor :

In a harmonic rich network, the over all power factor of the electrical network not only depends on the displacement power factor but it also depends on the harmonic distortion in the electrical network. The…

Continue

Added by Satyadev Vyas on June 9, 2019 at 10:22pm — No Comments

How To Cope With Future Market Developments In Aircraft Line Maintenance

Aircraft line maintenance is the repair, inspection or modification of an Aircraft. Inspection of an aircraft is done by predetermined schedules. Line and base maintenance are the ways which help in inspection of the aircraft where base maintenance includes activities which require the aircraft to be taken out of service for longer periods whereas line maintenance activities are mostly carried out during normal turn around periods. Out sourcing of line maintenances services and technological…

Continue

Added by Jitendra More on June 7, 2019 at 4:25am — No Comments

Need of Alarm Systems in Home

House is claimed to be a place where all the member of the family stay. Expect you have a big house and have a safe packed with money. Next day you locate your secure missing. What will you do after that? You may report to cops yet you will think why I have not mounted an system. So setting up an system is a crucial job that you ought to do first for securing your residence from any kind of kind of burglar task.

 …

Continue

Added by Kelly Wilson on June 7, 2019 at 2:30am — No Comments

Trends in Horticulture Lighting

Horticulture lights function as a replacement for sunlight as the catalyst in the plant growth.…

Continue

Added by Jitendra More on June 6, 2019 at 9:12pm — No Comments

Substation Automation--Rising Demand for Renewable Energy Projects to Encourage Growth

A tremendous rise in the demand for low-cost substation automation solutions, especially in the solar sector is expected to encourage the growth of the global substation automation market in the near future. The rise in the demand for renewable energy projects in the substation automation market is likely to support the growth of the market throughout the forecast period. In addition to this, the rising need for retrofitting conventional substations is another major aspect that is…

Continue

Added by Jitendra More on June 6, 2019 at 3:40am — No Comments

5G Infrastructure Market - Emerging Trends 2019

Fifth generation or 5G is the latest generation to succeed the 4G, 3G, and 2G systems of cellular mobile communications. 5G infrastructure consists of enhanced mobile broadband with reduced latency and targets data rate, cost-reduction, energy saving, and higher system capacity. It is likely to witness better spectrum management, data…

Continue

Added by Jitendra More on June 4, 2019 at 2:52am — No Comments

Hardware Vendors Will Win Big in Meeting the Demand For Edge AI Hardware

                                                                          Image Credit: analyticsindiamag

An edge device is a piece of hardware that controls data flow at the boundary between two networks. Edge devices function with different roles, depending on what type of device they are, however essentially serve as network entry points. Some examples of…

Continue

Added by Jitendra More on June 4, 2019 at 1:04am — No Comments

Current Scenario of Power Electronics for Engineers & Entrepreneur

Demand for electrical and electronics engineers in the field of power electronics is steadily on the rise in India. But what is required of them to befit this industry? 

Power electronics deals with the devices that can convert and control the power from source to load in an efficient manner. Power electronic devices are used in order to prevent damage caused by fluctuating current and high voltages. There are different type of power electronics devices used like Power IC,…

Continue

Added by Jitendra More on May 31, 2019 at 3:41am — No Comments

Monthly Archives

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

1999

Members

© 2019   Created by Marshall Matheson.   Powered by

Badges  |  Report an Issue  |  Terms of Service