Well known Sun Tzu’s The Art of War is famous in business and enterprise management…

Continue

This blog is meant for Friends in this Engineering Exchange Society.





Here we go……

There are two ways of Design Approach for the Cable Assembly.

1. Top Down Assembly ( for Complex and Real World Assembly, Define Wire, Connector, from the Diagram and auto routing ,etc….)

2. Bottom up Assembly ( Define Wire ,Connector, Route by Manually)

In this exercise, I will go for Second Method. I prepared some… Continue

Create Bend command is a simple and effective method in Pro-E Sheet metal design. Just define a line on the flat panel and can see a result of finished bend. Actually It included basic theory and design aspect of sheet metal. For the previous blogs, we created the finished design and result the final flat pattern. But using Bend command is a reverse process and actual process flow of sheet metal. We… Continue

This week I am going to take “SHELL” command as an exercise. Sometimes, my pro-e command approaches are unprofessional and unsystematic.

I created one solid piece part as shown below Picture.

I changed to Sheet metal Application and use as SHELL command (same as Solid) removed the top surface a to become as a open box.…

Continue

I was inspired by sikter’s work (reference:MCADCENTRAL.com ) and his method is really useful when we do technical presentation .I would like to present some simple animation by Pro-E Wild fire 2 Version. But my work quality is RAW state and only for illustration purpose. I am hoping that most of you can be done better than this.



I made a few… Continue