April 2009 Blog Posts (7)

Animation with Pro-Engineer Wild Fire 2 (Part –1 Rotation)





I was inspired by sikter’s work (reference:MCADCENTRAL.com ) and his method is really useful when we do technical presentation .I would like to present some simple animation by Pro-E Wild fire 2 Version. But my work quality is RAW state and only for illustration purpose. I am hoping that most of you can be done better than this.



I made a few… Continue

Added by Kratos72 on April 26, 2009 at 8:00am — 2 Comments

looking for partners for ocean energy conversion equipment

I have a patent pending design for a unique ocean energy capture/conversion device that generates electric power by converting sea power to hydraulic power to drive hydraulic motors to drive electric generators. I also have two more designs for certain near shore ocean conditions that are highly efficient and about ready to have patent applications entered. I am looking for a partner company or companies for assistance in detail design and funding for pilot plant experimental equipment and… Continue

Added by doug cooley on April 21, 2009 at 8:54am — 1 Comment

Electrical Metering Project Engineers and Managers needed for UAE

Our client is a European metering and smart grid techncology provider currently involved in several large-scale installation projects in the UAE and neighbouring countries. We need several Project Managers and Engineers with 5-20 yrs proven and relevant experience in metering installations and rollout. Middle East experience is a plus but not necessary. Company provides full relocation assistance and a competitive package. CVs to dubai@chronosconsulting.com

Added by Edith Varhelyi on April 20, 2009 at 6:00am — No Comments

To tell the truth...

How can you discern what and how much of the information that you receive every day, every hour, by word of mouth or in print is the truth? Unless you are an expert yourself in the subject matter under discussion or have first-hand knowledge and experience with it — you cannot. And what is worse, under the scrutiny of a magnifying glass, much of the information and data that you are bombarded with today through traditional channels (as much as 80%, in my opinion) is tainted in some way with… Continue

Added by John R. Gyorki on April 17, 2009 at 7:34am — 6 Comments

Sheet Metal Design with Pro-Engineer Wild Fire 2 (Part –3 Forming)

Sheet Metal Design with Pro-Engineer Wild Fire 2 (Part –3 Forming)





Forming (Punch and Die) is a powerful feature in Pro-E Sheet Metal module. It can be simple to execute for Design requirement. I would like to introduce Forming command in the simplest form in this blog.

Design Requirement : Machine Panel with louvers and Four Mounting Features at the corners.

My design plan is to make Louvers by Punch Forming and Mounting… Continue

Added by Kratos72 on April 12, 2009 at 4:30am — No Comments

Sheet Metal Design with Pro-Engineer Wild Fire 2 (Part –II Bending Reliefs)

Sheet Metal Design with Pro-Engineer Wild Fire 2 (Part –II Bending Reliefs)





From my previous blog, I created two bending panels but fail to add another panel between two bend panels.

It showed that we need the extra process called bending relief cut to the panels.

Bending relief is a essential feature in Sheet metal module. Sometime, software may not proceed if bending relief cut is not enough. Basic rule is Bending relief… Continue

Added by Kratos72 on April 5, 2009 at 4:00am — 1 Comment

Designing with Thermistors

Temperature sensor applications usually fall into one of three general categories; monitoring, control, or circuit compensation, and four sensor types; thermocouples, thermistors, resistance-temperature detectors (RTD), and semiconductor temperature sensors. When selecting a sensor, some key characteristics to consider include temperature range, accuracy, response time, minimal temperature effect on the measured object, and the type of signal conditioning required. Other… Continue

Added by John R. Gyorki on April 1, 2009 at 6:00am — No Comments

Monthly Archives

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

1999

Members

© 2018   Created by Marshall Matheson.   Powered by

Badges  |  Report an Issue  |  Terms of Service