antonio clinton
  • Male
  • Melbourne
  • Australia
Share on Facebook
Share
 

antonio clinton's Page

Latest Activity

antonio clinton posted blog posts
Oct 31
antonio clinton posted a blog post

Dirty PCB

The Printed Circuit Boards are sometime corroded due to a number of reasons. Some of the reasons are its exposure to the moisture or some other agents might also corrode it. These are then called as dirty PCBs. There is a proper technique to make such PCBs back to working condition. Steps for the Recovery of Dirty PCBsWhen any of the dirty PCBs are returned back to the manufacturing company due to some reasons, the…See More
Oct 23
antonio clinton posted a blog post

Problems and Considerations in PCB Design when using Piezotronic Devices

Piezotronic devices demonstrate the effect of material polarization due to mechanical stress or deformation of the material and vice-versa. This phenomenon can be exploited to get sensor data of temperature, mechanical pressure, vibration etc. — or using the opposite mechanism to control actuators. Since piezotronics technology is mainly related to analog signals and high quality performance, negative effects generated by or acting into analog signals should be taken carefully into…See More
Oct 20
antonio clinton posted blog posts
Oct 18
antonio clinton posted a blog post

China PCB Manufacture Company

As we all know the labors and costs of technique or manufacturing industries shows much lower than some developed countries.There are a lot of PCB Manufacturing Companies in China but how to choose a right PCB Manufacturing Company may be not easy.You need to search or view many fourms or websites to decide.There is a price comparison site of pcb manufacturing companies named pcbshopper, it can tell us something about some cheapPCB Manufacturing Companies. Take Australia and the same…See More
Oct 13
antonio clinton posted a blog post

The Factors Need to Be Considered When Ordering Online

1.Instant Quote Some Online Manufacturers supply instant quote, so that people can get an approximate price for the boards they specified.In this way,the customers or the purchase team will know whether the price under their budget or not.It’s really convenient because they don’t need to contact with the sales.As i know,some online PCB Manufacturers such as allpcb,4pcb,wellpcbprovide this service currently.2.Quality &…See More
Sep 27
antonio clinton posted a blog post

Can a PCB Trace support peak currents?

Most homemade DIY PCB Prototypes may not withstand peak currents; at least not for a long time. This is because all through their making process, the greatest factor of consideration is basic functionality for a proof of concept. A professional PCB design should not only be able to cope with peak currents but also other currents anticipated in the circuit. These includes Overcurrent, Short-circuit and Peak currents. When the circuit experiences some Overcurrent, the circuit traces should be…See More
Sep 6
antonio clinton posted a blog post

Combining Multiple EAGLE PCBs Into One

If you are a PCB designer or a beginner and you like using EAGLE CAD PCB Design program, at some point, you will want to combine multiple PCBs so that they be like one PCB on a common PCB board. There are different reasons that may drive you into wanting to combine multiple PCBs. One of the most common reason is that, you may have made many di erent small boards and after testing them, you nd that they function well and would be great if they were manufactured. Sending separate boards to a PCB…See More
Aug 24
antonio clinton posted blog posts
Aug 17
antonio clinton posted a blog post

2017 Tendency For Electronic Components Market

A selection of surface mount electronic components including SMD capacitors, SMD resistors, integrated circuits, etc For components distributors, manufacturers of electronic equipment and many others, it is necessary to have an understanding of the electronics component market for 2017. In times of boom, components are harder to source-prices rise and lead times significantly increase, especially for semiconductors. In times of recession prices fall and availability increases.Planning to…See More
Aug 14
antonio clinton posted a blog post

Can vias and traces conduct electricity on PCB surface?

It is required that vias and traces should conduct electricity. However, it is not in order if they conduct electricity on places or areas that they were not designed to conduct electricity. Can vias and traces conduct electricity on a PCB surface? The short answer is yes and no. For the long answer, we must go back to the basics of what vias and what traces are.Vias are basically conducting holes on the PCB. They electrically connect one PCB Layer with another, say, connecting top PCB layer…See More
Aug 10
antonio clinton posted blog posts
Aug 3
antonio clinton posted a blog post

How to Make Holes in SMT Stencil

Making holes in SMT StencilWhether you are making a DYI surface mounted PCB or it is a PCB prototyping factory dealing with SMT PCBs, solder paste is always used. It is applied onto the SMT pads and then it is passed through a reflow oven to solder the electronic devices firmly on the copper surface. To apply the solder paste on the SMT pads, the most economical method is to use an SMT Stencil. The problem at hand is how to make holes on these SMT Stencils. In this section, we shall discuss…See More
Jul 28
antonio clinton posted a blog post

How To Judge The Quality Of PCB ?

With the rapid development of mobile phone, electronic, telecommunications and other industries, Printed Circuit Board industry continues to grow rapidly, at the same time also prompted people to require more and more about the PCB number, weight, color, material, precision, reliability and so on. But because the competition of the PCB market, PCB material is also in the rising trend.So more and more manufacturers in order to enhance the core competitiveness, often use low price to monopolize…See More
Jul 27
antonio clinton posted a blog post

Some Questions Met When Designing PCBs

Usually,there are always some questions met when you designing your PCBs, today i will introduce some questions about designing rapid PCBs and what should focus on.1.In rapid PCB Design, how to solve the problem of signal integrity?Basically signal integrity is the impedance matching problem. Factors that influence of the impedance matching are the signal source structure and output…See More
Jul 20
antonio clinton posted a blog post

Printed Circuit Board Blind and Buried Vias

ViasA Via is simply a copper plated hole that connects two or more copper layers. Vias are very useful for efficiently making complex multilayer PCBs, highly populated with electronic components over a small PCB area. There are different types of vias: Through via, Stub via, Blind via and Buried via. A Through via runs through all the copper layers (top to bottom) but does not connect to any of the internal layers. A Stub via is similar to a Through via but can connect to any internal layers.…See More
Jul 18

Profile Information

Company
WellPCB
Job Title
Electronics Engineer
Industry
Electronics
Company Website
http://www.wellpcb.com
Your Engineering Focus
Pcb manufacturer
I'm Looking For:
Friends, Networking, Business Partners, Peer Feedback
Personal Interests
My name is Antonio Clinton, I am good at analysis, with a strong sense of cooperation. In my spare time, I like to read books regarding how to be myself and how to deal with problems. Music and movies are my favorite entertainments.
Other Website / Personal Site / LinkedIn Profile
http://medium.com/@pcb_prototype

antonio clinton's Photos

  • Add Photos
  • View All

antonio clinton's Videos

  • Add Videos
  • View All

Antonio clinton's Blog

Two-Layer PCB

Posted on October 31, 2017 at 10:59pm 0 Comments

A two-layer PCB is also called a double-layer or double-sided PCB. It is basically made of an FR-4 glass epoxy substrate laminated with thin copper film or layers on both side. two-layer PCB is the simplest and the most economical PCB to design. A two-layer PCB can easily be manufactured by a professional PCB Prototyping factory (e.g. wellpcb.com), and can also be made at home. Two-layer PCB has only the top and the bottom…

Continue

China PCB

Posted on October 30, 2017 at 11:18pm 0 Comments

One attractive thing with China PCB is fair pricing and superior quality relative to the price paid. China PCBhave an online platform to place an order and also pay through a variety of payment methods. A Professional PCB manufacturer like Wellpcb will allow you to pay via PayPal payment method which is the most prefered. Wellpcb also allows you to choose a shipping method of your preference…

Continue

Dirty PCB

Posted on October 23, 2017 at 2:47am 0 Comments

The Printed Circuit Boards are sometime corroded due to a number of reasons. Some of the reasons are its exposure to the moisture or some other agents might also corrode it. These are then called as dirty PCBs. There is a proper technique to make such PCBs back to working condition.

Dirty PCB1.png

 

Steps for the Recovery of Dirty PCBs

When any of the dirty PCBs are returned back…

Continue

Problems and Considerations in PCB Design when using Piezotronic Devices

Posted on October 20, 2017 at 2:45am 0 Comments

Piezotronic devices demonstrate the effect of material polarization due to mechanical stress or deformation of the material and vice-versa. This phenomenon can be exploited to get sensor data of temperature, mechanical pressure, vibration etc. — or using the opposite mechanism to control actuators. Since piezotronics technology is mainly related to analog signals and high quality performance, negative effects generated by or acting into analog…

Continue

Comment Wall (1 comment)

You need to be a member of The Engineering Exchange to add comments!

Join The Engineering Exchange

At 9:22am on August 14, 2017, PRECIOUS ROMEO said…

Good Day,

How is everything with you, I picked interest on you after going through your short profile and deemed it necessary to write you immediately. I have something very vital to disclose to you, but I found it difficult to express myself here, since it's a public site.Could you please get back to me on:( preciousromeo6@gmail.com
 ) for the full details.

Have a nice day

Thanks God bless

Mrs Precious.
 

 
 
 

Members

© 2017   Created by Marshall Matheson.   Powered by

Badges  |  Report an Issue  |  Terms of Service