Information

Green Engineering

Green Engineering is the design, commercialization and use of processes and products that are feasible and economical while minimizing:
Generation of pollution at the source and risk to human health and the environment.

Members: 321
Latest Activity: Apr 19

National Instruments Green Engineering Resrouces

National Instruments Announces 2012 Green Engineering Grant Programme

News Highlights · The grant programme aids eligible small companies and research groups focused on innovative control and measurement applications in renewable energy and clean-tech fields worldwide. ...

Announcing the 2012 NI Green Engineering Grant Program - Discussion Forums

Great news! We are renewing the NI Green Engineering Grant program in 2012. The grant program helps eligible small companies and research groups

National Instruments Announces 2012 Green Engineering Grant Program

Because of the success of customers involved in the NI Green Engineering Grant program, the company is renewing the program for another year.

Comment Wall

Comment

You need to be a member of Green Engineering to add comments!

Comment by Andrew Feliks on April 19, 2017 at 11:35am

Or maybe a two-wheel car would do ... There's no need for an differential and anything .. see the Segway

There is no steering wheel, and what's the return .. because let's say on wheels 1.5 meters in diameter ... for every trimmer will come ..

http://www.new4stroke.com/Segway.jpg

Comment by Andrew Feliks on August 30, 2016 at 1:05pm

Here the wing crank, because the wind can produce ourselves, when we want and where we want .. remember the carousel, like hair blowing in the wind, when it was going on?

https://www.youtube.com/watch?v=Ey9W39NDXx0&feature=youtu.be

Comment by Andrew Feliks on May 19, 2016 at 5:59pm

Here a link for professionals, which, in one place trying to give some knowledge about my engine. Thinking in terms of only heat the internal combustion engine and associated only with the efficiency of the internal combustion engine is a serious limitation of understanding of the internal combustion engine .. As described, the efficiency of the internal combustion engine, Primarily a depends on the efficiency to overcome the forces of inertia. Generally, twice heavier engine of the same displacement, will be much less efficient, its lighter version and the consequent efficiencies, have nothing to do with the heat .. Because overcome the forces of inertia does not cause any increase or loss heat .. So thinking only categories that everything can be reduced to the category of heat is a big mistake, because overcoming inertia can not "force" reduced to the category of heat.

http://forum.engine-research.com/index.php?PHPSESSID=oamomao353s1eb...

Andrew

Comment by Andrew Feliks on May 10, 2016 at 10:46am
Comment by Andrew Feliks on April 29, 2016 at 4:15pm


Well, sometimes you can use the models made by others, and do not spend money on their models. Here you can see very well that this model boats, capable of flowing even into the wind .. But demonstrator, not even suppose that, in this way, is also a way to produce wind, because the boat is sailing faster and for this reason, the wind acting on the windmill you will be getting stronger ... if you are a boat tied to a string to floating around, it will float forever ... .. unless my eyes deceive me ..:tsk .. of course my solution, instead of the classic windmill, windmill will be Red Baron version double teaspoon, which closed Roots and the propeller will power.

https://www.youtube.com/watch?feature=player_embedded&v=8Rw_qJy...

[img]http://www.new4stroke.com/underwater.jpg[/img]

Andrew

Comment by Andrew Feliks on December 25, 2015 at 9:37pm

Well, maybe you need to start from the simple structure ... Here a tandem bike in which the other in the rear never laze will not be ....
The experience you need to slowly gather .. the Wright brothers' first flight at the time, only 278 meters flew his machine ..

[img]http://www.new4stroke.com/Wingtandem.jpg[/img]

Andrew

Comment by Andrew Feliks on November 30, 2015 at 10:48am

Here the newest model of the wind my car .. Only cosmetic changes on the outside .. :)

[img]http://www.new4stroke.com/newmodel.jpg[/img

But inside the revolution ..
I present two screenshots of the simulator NASA airfoil and it is clear that at different angle of attack with a symmetrical profile, receive different values ??of lift .. From negative to positive .. or 160 KG positive, or 160 kg (320 lbs) negative (downward pushing sash) when changing the angle of attack of 30 degrees .. and dimensions of the wings 2, 5 meters square at a speed of 100 km / h (60 miles)

[img]http://www.new4stroke.com/foilplus.jpg[/img]


[Img]http://www.new4stroke.com/foilminus.jpg[/img]

Well, this wing of their forces can drive the crankshaft directly ..
Here, the animation .. The angle of attack of the wing can change either electrically or mechanically (cam) There is no need for this high energy ..

https://youtu.be/evC5y0wgOVM

evC5y0wgOVM

https://youtu.be/evC5y0wgOVM

https://www.youtube.com/watch?v=evC5y0wgOVM&feature=youtu.be

Well needless to say that such a system also can work at creating their own wind ... ..

I had to publish it on Santa Claus, but that the climate summit a little hurried me .. Because after what happened there in May too tired and negotiate, as you no longer need .. maybe someone out there will send a telegram?:rolleyes:

Comment by Andrew Feliks on October 24, 2015 at 8:35pm

So come on ramjet engine, such as the SR 71 .. which drives the generator on a treadmill, and give you the energy ... but when we have a stream of departing gases, after the addition of neodymium magnets can be good even with these tubes directly receive electrical energy generated MHD generator .. no as shown in the figure also how we will burn pulverized coal .. no but the engine is a framework is the same as scram jet, only at lower speeds. In 2015 Tokyo was developed in the engine scram is that with the help produced on the basis of MHD power also speeds up the exhaust gases on the MHD reverse. We need to get all our MHD mounted on the framework jet engine gave only electricity .. extra for electricity from the generator to the axis of the device .. but that's not all we can with the energy produced in this way receive .. Because the device is going to rotate in a circle with a diameter of 30 m, then we can all thermal energy from the combustion of fuel to pick up, building a 35-meter housing for the device. And WHOLE heat generated can pick up with the aid of heat recovery units (coolers or tubes such as in a steam boiler) and use it, or even to produce additional power, or (i) for heating .. This time none have not wasted

[img]http://www.new4stroke.com/GENERATOR.jpg[/img]

[img]http://www.new4stroke.com/SCRAM.JPG[/img]

[img]http://www.new4stroke.com/MHDscramjet.jpg[/img]

[img]http://www.new4stroke.com/index_php_3755dfe7.jpg[/img]



Comment by Andrew Feliks on October 24, 2015 at 8:29pm

Wuzak, on 12 Oct 2015 - 03:07, said:
The SR-71 had turbojets, not ramjets.

So yes, engines SR71, a combined cycle engines .. to take-off and less than one Mach a turbine engine plays an essential role, but above the speed second element of this combination, which is a ram-jet engine (the tube that flows air) begins to play a dominant role speeds above Mach 3, giving it 82% of the total during what has at its disposal the plane. that is, if we gave up at that speed at all of the turbine engine, this string would only decreased by 18%. I think that on threads loss in our application we can afford and get rid of at all of this very complicated and expensive engine components SR 71. we are left only ram-jet, and he will be with an efficiency of about 95% at the speed .This is written in the NASA study concerning the second combined cycle Ramjet engine of the rocket engine .. rocket engine ..

https://en.wikipedia.org/wiki/File:SR71_J58_Engine_Airflow_Patterns...

http://www.nowy4suw.republika.pl/sr71%20naped.pdf

http://ntrs.nasa.gov/archive/nasa/casi.ntrs.nasa.gov/20110013567.pdf

https://smartech.gatech.edu/bitstream/handle/1853/8439/aiaa_96-2688...

But for our purposes of energy production should be enough speed less than 1 mach. Well, here the helicopter, which must be produced from 100KW power to fly ..

https://www.youtube.com/watch?v=evjd49r52tg&feature=youtu.be

Except that I would not advise that a helicopter to fly .. but the current can do safely :rolleyes:

[img]https://scontent-lhr3-1.xx.fbcdn.net/hphotos-xat1/v/t1.0-9/11215866...[/img]

[img]https://scontent-lhr3-1.xx.fbcdn.net/hphotos-xpt1/v/t1.0-0/p180x540...[/img]


Andrew

Comment by Andrew Feliks on October 10, 2015 at 11:45am

So now even a version
So here the animation ramjet engines between the wings in a spoon effect, which is about 9 times increase input speed .. Pipes of course without turbines, such as SR 71, and, so to eye with 250 MW of getting So, yes, the set of a diameter of 30 meters, having the 250 MW of power, he would have 12 pieces of such pipes since SR71, visible starter pneumatic boot, and the number 2 units would give so much energy around, a small nuclear power plant Only with the size of the power plant, even coal, consumed for own use 50 MW (high pressure pumps, blowers and fans, etc.). Here only the minimum energy for the fuel supply system, expressed in kilowatts ..
And the cost of investment that air football field, probably will be significantly smaller.
It's to improve the imagination, what I'm saying.
Well, here we have any fuel - coal dust, gas, oil.

https://www.youtube.com/watch?v=8u7dzn75LHo&feature=youtu.be

 

Members (321)

 
 
 

Members

© 2017   Created by Marshall Matheson.   Powered by

Badges  |  Report an Issue  |  Terms of Service