Replies to This Discussion

Permalink Reply by Robert Goencz on November 2, 2009 at 8:58am

Well I guess what I can do is send you a trial project. One that I just sold to NBC Universal Studios In California. This is a 12 foot Long conveyor, 8feet wide
Load would be Approx 500 to 700 pounds over 3 feet Maximun. The speed Needs to be variable Up to 720 FEET per minute
The conveyor must also have a base that will allow full rotation at a speed of 3 revolutions per min Max.
The conveyor and turn table must be designed as low as possible to the floor level.
The Voltage will be suitable for this project. The conveyor will be fitted with an inverter to allow a computer to be hooked up to the conveyor in order to adjust the pictures in the back ground.
This is a simple project and if you have any other questions please email direct which is robert at gi3 dot ca

Permalink Reply by prasad d on November 3, 2009 at 9:38am

Hi,
Nice to know you.

How do you work ? I mean do you have a team or you work independently ?

I make customized machines. At present I am developing a vacuum sealing machine and a Plasma cnc cutting machine.

I have a small setup. But mostly I work alone. Only for electronics I have tie-up with a company which takes care of all electronics.

I would like to know more about the work you do.

Bye

Laxmiprasad Date

Permalink Reply by ABHIJIT AMDEKAR on November 3, 2009 at 6:31pm

I am based in Pune. I work from home, on my own. I offload drafting work occasionally. Visit my website machinart dot com.

Permalink Reply by Ron Howarth on December 10, 2009 at 6:56am

I have updated my wood handling equipment web site with a radial cross cut saw for timbers
designed in solidworks
http://ronhowarthservices.com

Attachments:

• Radial Saw in forward stroke.PDF, 1.3 MB

Permalink Reply by S.Srinivasan on August 10, 2010 at 7:28am

hi mr.abhjit i am from sivakasi in tamilnadu. we are into small custom built machine building business. currently we have some projects going on for which we are looking for tele-commuting freelancers to speed up our development. if you are interested pl contact fewindia@gmail.com

Permalink Reply by Joe Agro on September 6, 2012 at 10:00am

Abhijit,

I just read all the comments and see you are in Pune.  I have a representative there.  If you are able to generate leads for the equipment we sell, we would gladly consider working with you.

Maybe reply privately here (is that possible) or contact us via our web site ww.drill-hq.com

Regards,

Joe